JOURNAL PUBLICATIONS

Halim, T., Burgett-Moreno, M., Donaldson, T., Clarke, I.C. Third-body Wear Damage Produced in CoCr Surfaces by Hydroxyapatite and Alumina Ceramic Debris: A 10-cycle Metal-on-Metal Simulator Study. Reconstructive Review 2015; December: p33-39.

 

Clarke, I. and Lazennec, J. Margin-of-Safety Algorithm Used with EOS Imaging to Interpret MHRA Warning for 46-48mm MOM Arthroplasty. Reconstructive Review 2015; October: p13-21.

 

Donaldson, T., Burgett-Moreno, M., Clarke, I.C. Excessive Anteversion Leads to Failure at 3 Years Due to Impingement as Evidenced by Twin Notches in Ti6A4V Stem Reconstructive Review 2015; Vol 5, July: p25-28.

 

Burton, P., Medina, E., Burgett-Moreno, M., Donaldson, T.K., Clarke, I.C. Biomechanical Alignment of Main Wear-Pattern on MOM Total Hip Replacement. Reconstructive Review 2015; July: p19-23.

1. Halim, T., Clarke, I.C., Burgett-Moreno, M., Donaldson, T.K., Savisaar, C., Bowsher, J. A simulator study of adverse wear with metal and cement debris contamination in metal-on-metal hip bearings. Bone Joint Res 2015; 4:29-37.

2. Halim, T., Burgett, M., Donaldson, T.K., Savisaar, C., Bowsher, J.G., Clarke I.C. A MOM simular study profiling 3rd-body abrasion potential by bone-cement, CoCr and Ti6A14V particulates. Proc IMechE PartH: J Engineering in Medicine, 2014: 1-12.

3. Donaldson, T., McPherson, E., Burgett, M., Clarke, I.C. MOM Failure Modes: An In-Depth Look at Metal Ions and Implant Wear. Reconstructive Review 2014; March: p33-37.

4. Clarke, I.C., Lazennec, J.Y., Brusson, A., Savisaar, C., Bowsher, J.G., Burgett, M., Donaldson, T.K. Risk of Impingement and Third-body Abrasion With 28-mm Metal-on-metal Bearings. Clin Orthop Relat Res, 471 (2013).

 

Clarke, I.C., Donaldson, T.K., Burgett, M., Smith, E.J., Bowsher, J.G., Savisaar, C., John, A., Lazennec, J.Y., McPherson, E., Peters, C.L. Normal and Adverse Wear Patterns Created In-vivo on MOM Surfaces - a retrieval study representing four vendors. M. Kurtz, S.A. Greenwald, W.M. Mihalko, J.A. Lemons (Eds.) ASTM Symposium on Metal-on-Metal Total Hip Replacement Devices, ASTM International, West Conshohocken, PA, 2013 pp. 157-192.

 

Burgett, M., Donaldson, T.K., Clarke, I.C. Denatured proteins deposits identical on simulator and explanted hip bearings?  M. Kurtz, S.A. Greenwald, W.M. Mihalko, J.A. Lemons (Eds.) ASTM Symposium on Metal-on-Metal Total Hip Replacement Devices, ASTM International, West Conshohocken, PA, 2013 pp. 235-250.

 

Wong, W., Clarke, I.C., Donaldson, T.K., Burgett, M. Surface roughness of retrieved femoral heads in CoCr-Polyethylene Hip Bearings – A retrieval assessment with 11-17 years follow-up. Reconstructive Review 2013; March: p45-48. Sorimachi T, Donaldson TK, Yamamoto K, Clarke IC. Revision of Snapping” MOM hip joint – A Case Study.  In preparation for pub: J. Arthroplasty, 2011

 

C Coldwell, M Froimson, M Mont, M Ritter, R Trousdale,K Buehler,  A Spitzer, TK Donaldson, D Padgett. Thrombosis Prevention After Total Hip Arthroplasty.  JBJS 2010;92:527-535.

 

T Ishida, IC Clarke, TK Donaldson, H Shirahasu, T Shishido, K Yamamoto. Comparing Ceramic-Metal to Metal-Metal Total Hip Replacements- A Simulator Study of Metal Wear and Ion release in 32 and 38 mm bearings. J Biomed Mater Res B Appl Biomater. 2009,Nov;91(2):887-96.

 

Bowsher JG, Clarke IC, Williams PA, Donaldson TK. What is a “normal” wear pattern for metal-on-metal hip bearings? J Biomed Mater Res B Appl Biomater.  2009;(1):297-308.

 

JG Bowsher, TK Donaldson, PA Williams, IC Clarke.  Surface Damage After Multiple Dislocations of a 38 mm Diameter Metal on Metal Prosthesis. J Arthroplasty.2008Oct;23(7)1090-6.Epub 2008 Mar 14.

 

SS Brown, DD Green, G Pezzotti,TK Donaldson, IC Clarke. Possible Trigger for Phase Transformation in Zirconia Hip Balls.  J Biomed Mater Res B Appl Biomater. 2008May;85(2):444-52.

 

T Sorimachi, TK Donaldson, IC Clarke, K Yamamoto. Surface Analysis of Retrieved Metal to Metal Implants. 20th Ann Symp Int Soc Tech Arthroplasty, Paris, France, October 4-6, 2007. (Submitted)

 

TK Donaldon, A Massihi, JG Bowsher, IC Clarke. Co-Cr Head Roughness and Its Effect on Wear of UHMWPE and XLPE Cups. Book Series: Ceramics in Orthopaedics. Book: Bioceramics and Alternative Bearings in Joint Arthroplasty. Publisher Steinkopff. ISBN 978-3-7985-1518-5, Pages 51-58, SpringerLink, March 10, 2006

 

 

G Pezzotti, IC Clarke, C Jobe, TK Donaldson, K Yamamoto, T Tateiwa, T Kumakura, R Tsukamoto, J Ikeda. Confocal Raman Spectroscopic Analysis of Ceramic Hip Joints: Key Engineering Materials; Vols 309-311 pp.1211-14, 2005.

 

IC Clarke, DD Green, G Pezzotti and TK Donaldson. 20 Years Experience of Zirconia Total Hip Replacements. Book Series: Ceramics in Orthopaedics 2005; 79-83.

 

TK Donaldson, A Massihi, JG Bowsher and IC Clarke. Co-Cr Head Roughness and its Effect on Wear of UHMWPE and XLPE Cups. Book Series: Ceramics in Orthopaedics 2005; 51-58.

 

IC Clarke, G Pezzotti, DD Green, H Shirasu and TK Donaldson. Severe Simulation Test for run-in wear of all-alumina compared to alumina composite THR. Book Series: Ceramics in Orthopaedics 2005; pp. 11-20.

23.  IC Clarke, TK Donaldson, JG Bowsher, S Nasser, T Takahashi. Current Concepts of Metal-on-Metal Hip Resurfacing. Orthopedic Clinics of North America 2005; 143-162.

 

BOOK CHAPTERS

1.     Clarke IC, Donaldson TK, Kubo K, Lazennec JY, McPhereson E, Peters C, et al. Wear Performance of MOM and COC Bearings – A Correlation of Laboratory and Retrieval Studies. In: Wang A, Streicher R, editors.  Tribology and Bearing Surfaces in Total Joint Replacements: Transworld Research Network: 2011.

2.     Clarke I, Donaldson T, Jobe C.  Chapter1: Total Joint Replacement: Effects of Materials and Design in Osteolysis. In: Garino J, Beredjiklian P, editors. Adult Reconstruction and Arthroplasty: Core knowledge in Orthopaedics. New York: Mosby – Elsevier:2007. P 1-28.

 

ABSTRACT PUBLICATIONS

1.     Elsissy, J., John, A., Smith, E., Donaldson, T., Burgett-Moreno, M., & Clarke, I. MOM Resurfacing Wear Patterns and the Effect of Limited ROM. Bone Joint J 2016, 98-B: (SUPP 1) 117.

2.     Burgett-Moreno, M., Medina, E., Burton, P., Donaldson, T., & Clarke, I. Large Diameter MOM with Metal Toxicity Leading to Revision. Bone Joint J 2016, 98-B: (SUPP 1) 116.

3.     Burgett, M., Clarke, I.C., Donaldson, T.K., Halim, T. MOM Lubrication and the Role of Proteins:  How Protective Are They? Bone Joint J 2013, 95-B: (SUPP 34) 256.

4.     Burgett, M., Halim, T., Vinciguerra, J., Donaldson, T.K. Morphology of Polyethylene Debris from Vitamin-E Blended Cups Subjected to 3rd-Body Abrasive Wear Challenge in a Hip Simulator. Bone Joint J 2013, 95-B: (SUPP 34) 257.

5.     Clarke, I.C., Lazennec, J.Y., Bursson, A., Burgett, M., and Donaldson, T.K. Topography of Modular Junctions in 28mm MOM – Gold-Standard European Threaded Taper (12/14). Bone Joint J 2013, 95-B: (SUPP 34) 117.

1. Halim, T., Burgett, M., Clarke, I.C., and Donaldson, T.K. MOM damage resulting from 3rd body particulates: A simulator model. Bone Joint J 2013, 95-B: (SUPP 34) 30.

2. Halim, T., Burgett, M., Clarke I.C., and Donaldson, T.K. Ten-fold increase in MOM wear rates resulting from 3rd body metal particulates: A simulator model. Bone Joint J 2013, 95-B: (SUPP 34) 340.

3. McPherson, E., Burgett, M., Halim, T., Donaldson, T.K., and Clarke, I.C. Retrieval analysis of a CoCr:Ti6Al4 modular head combination at 18 years duration. Bone Joint J 2013, 95-B: (SUPP 34) 420.

4. Nguyen, D., Burgett, M., Halim, T., Donaldson, T.K., and Clarke, I.C. Debris Impact Zones in Metal-on-Metal Bearings: A New ‘Donga’ Insight. Bone Joint J 2013, 95-B: (SUPP 34) 137.

5. Nguyen, D., Burgett, M., Halim, T., Donaldson, T.K., and Clarke, I.C. Subluxation of Metal-on-Metal Bearings—Evidence of 2-body wear on CoCr Femoral Heads. Bone Joint J 2013, 95-B: (SUPP 34) 451.

6. Clarke, I.C., Lazennec, J.Y., Bursson, A., Burgett, M., and Donaldson, T.K. Impingement, Subluxation, and Abrasion Risks with 28mm MOM. Bone Joint J 2013, 95-B: (SUPP 34) 265.

7. Donaldson, T.K.,  Burgett, M., and Gonzales, Y. 7 to 10 year follow up of 104 Primary THA: A series of one MOM implant. Bone Joint J 2013, 95-B: (SUPP 34) 291.

8. Donaldson, T.K., Burgett. M., and Clarke, I.C. MOM Revisions: An in-depth look at metal ions and implant wear. Bone Joint J 2013, 95-B: (SUPP 34) 290.

 

PRESENTATIONS/POSTERS

1. Clarke, I.C., Halim, T., Burgett-Moreno, M., Donaldson, T., Bowsher, J., Savisaar. Catastrophic MOM Wear Triggered in a Hip Simulator Study by Intrusion of Metal Particles. British Hip Society, London, UK, 2015.

2. Clarke, I.C., Pezzotti, G., Lakshminarayanan, A., Burgett-Moreno, M., Donaldson, T. Silicon Nitride Bearings: An Alternative to Oxide Ceramics in Total Hip Arthoplasty. International Society for Technology in Arthroplasty 17th Annual Congress. Kyoto, Japan, 2014.

3. Clarke, I.C., Sufficool, D., Bowsher, J. Savisaar, C., Burgett-Moreno, M., Donaldson, T. Comparing Simulator Wear for MOM Bearings in Anatomical vs Inverted Cup Positions . International Society for Technology in Arthroplasty 17th Annual Congress. Kyoto, Japan, 2014.

4. Clarke, I.C., Kubo, K., Lazennec, J.Y., Burgett-Moreno, M., Donaldson, T., Yamamoto, K. Impingement and Subluxation Evidence Common in Retrieved 28mm THA - Analysis of 29 Metal-on-Metal (MOM) Cases. International Society for Technology in Arthroplasty 17th Annual Congress. Kyoto, Japan, 2014.

5. Clarke, I.C., Halim, T., Burgett-Moreno, M., Thompson, J., Vinciguerra, J., Donaldson, T. Aggressive 3rd-body Wear Challenge to Vitamin E Crosslnked Polyethylene: A Hip Simulator Model to10 Million Cycle Duration. International Society for Technology in Arthroplasty 17th Annual Congress. Kyoto, Japan, 2014.

6. Burgett-Moreno, M., Medina, E., Burton, P., Donaldson, T., Clarke, I.C. Large Diameter MOM with Metal Toxicity Leading to Revision. International Society for Technology in Arthroplasty 17th Annual Congress. Kyoto, Japan, 2014.

7. Elsissy, J., John, A., Smith, E., Donaldson, T., Burgett-Moreno, M., Clarke, I.C. MOM Resurfacing Wear Patterns and the Effect of Limited Range of Motion. International Society for Technology in Arthroplasty 17th Annual Congress. Kyoto, Japan, 2014.

8. Clarke, I.C., Burgett, M., Donaldson, T.K., John, A., Smith, E.J., McPherson, E., Peters, C.L., Savisaar, C., Bowsher, J.G. Risks of subluxation and impingement with large-diameter MOM bearings. Orthopedic Research Society, New Orleans, LA, 2014.

9. Clarke, I.C., Halim, T., Bowsher, J.G., Savisaar, C., Burgett, M., Donaldson, T.K. Adverse MOM wear rates resulting from 3rd body metal particulates:  A 3rd body abrasive Wear Model in Simulator. Orthopedic Research Society, New Orleans, LA, 2014.

10. Halim, T., Clarke, I.C.,  Burgett, M., Donaldson, T.K., Savisaar, C., Bowsher, J.G. Profiling CoCr Surfaces Damage Modes in 3rd-body Particulate Wear - A MOM Simulator Model. Orthopedic Research Society, New Orleans, LA, 2014.

11. Burgett, M., Halim, T., Vinceguerra, J., Donaldson, T.K., and Clarke, IC. Morphology of polyethylene debris from Vitamin-E blended cups subjected to 3rd-body abrasive wear challenge in a hip simulator. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

12. Burgett, M., Clarke, I.C., and Donaldson, T.K. MOM Lubrication and the role of proteins: How protective are they? International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

13. Clarke, I.C., Lazennec, J.Y., Bursson, A., Burgett, M., and Donaldson, T.K. Topography of Modular Junctions in 28mm MOM – Gold-Standard European Threaded Taper (12/14). International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

14. Halim, T., Burgett, M., Clarke, I.C., and Donaldson, T.K. MOM damage resulting from 3rd body particulates: A simulator model. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

15. Halim, T., Burgett, M., Clarke I.C., and Donaldson, T.K. Ten-fold increase in MOM wear rates resulting from 3rd body metal particulates: A simulator model. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

16. McPherson, E., Burgett, M., Halim, T., Donaldson, T.K., and Clarke, I.C. Retrieval analysis of a CoCr:Ti6Al4 modular head combination at 18 years duration. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

17. Nguyen, D., Burgett, M., Halim, T., Donaldson, T.K., and Clarke, I.C. Debris Impact Zones in Metal-on-Metal Bearings: A New ‘Donga’ Insight. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

18. Nguyen, D., Burgett, M., Halim, T., Donaldson, T.K., and Clarke, I.C. Subluxation of Metal-on-Metal Bearings—Evidence of 2-body wear on CoCr Femoral Heads. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

19. Clarke, I.C., Lazennec, J.Y., Bursson, A., Burgett, M., and Donaldson, T.K. Impingement, Subluxation, and Abrasion Risks with 28mm MOM. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

20. Donaldson, T.K., Burgett, M., Gonzales, Y. 7 to 10 year follow up of 104 Primary THA: A series of one MOM implant. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

21. Donaldson, T.K., Burgett. M., and Clarke, I.C. MOM Revisions: An in-depth look at metal ions and implant wear. International Society for Technology in Arthroplasty 16th Annual Congress. West Palm Beach, FL, 2013.

22. Burgett, M., Myant, C., Cann, P., Clarke, I.C., Donaldson, T.K. The Role of Protein Films on Hip Bearings Lubricated with Varied Protein Concentration. Orthopedic Research Society. San Antonio, TX, 2013.

23. Myant, C., Burgett, M., Clarke, I.C., Cann, P. The importance of synovial fluid proteins in the lubrication of artificial hips. Orthopedic Research Society. San Antonio, TX, 2013.

24. Clarke, I.C., Burgett, M., Donaldson, T.K., McPherson, E., Peters, C., Lazennec, J.Y., Savisaar, C., Bowsher, J.G. Macro-damage abrasion mode created by particulates formed during impingement of large-diameter MOM bearings. Orthopedic Research Society. San Antonio, TX, 2013.

25. Elsissy, J.G., Burgett, M., Sufficool, D., Clarke, I.C., Donaldson, T.K. Wear pattern comparison between RSA and THA retrievals reveal in-vivo subluxation. Orthopedic Research Society. San Antonio, TX, 2013.

26. Sufficool, D., Elsissy, J.G., Clarke, I.C., Burgett, M., Donaldson, T.K. Circumferential form analysis of large diameter MOM wear zones. Orthopedic Research Society. San Antonio, TX, 2013.

27. Wong, W., Burgett, M., Clarke, I.C., Donaldson, T.K. Surface roughness of femoral heads from metal-on-polyethylene total hip arthroplasty retreieved at over 10 years. Orthopedic Research Society. San Antonio, TX, 2013.

28. Clarke, I.C., Burgett, M., Elsissy, J., Donaldson, T.K., McPherson, E.J., Peters, C.L., Lazennec, J.Y., Savisaar, C., Bowsher, J. Adverse Abrasion-damage Created Routinely by Impingement of Large-diameter MOM. ICJR/Orthopaedics Today. Kona, HI, 2013.

29. McPherson, E.J., Clarke, I.C., Donaldson, T.K., Burgett, M. MOM Dislocator Case Demonstrating Importance of Impingement Damage Triggering Adverse 3rd-body Wear Risks. ICJR/Orthopaedics Today. Kona, HI, 2013.

30. Burgett, M., Donaldson, T.K., Clarke, I.C. Denatured proteins deposits identical on simulator and explanted hip bearings?  Metal-On-Metal Total Hip Replacement Devices, ASTM International STP1560; Phoenix, AZ, May, 2012.

31. Burgett, M., Clarke, I.C., Donaldson, T.K. Degraded protein deposits identified on ceramic and metal-on-metal bearings. Orthopedic Research Society. San Francisco, CA, 2012.

32. Clarke, I.C., Lazennec, J-Y., Burgett, M., Sufficool, D., Donaldson, T.K. Wear performance of 28mm MOM explants to large-diameter MOM. Orthopedic Research Society. San Francisco, CA, 2012.

33. Burgett, M., et al., Silicon Nitride: Protein Deposits in the Simulator Affecting Wear.13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA, 2011.

34. Kubo K, Clarke IC, Donaldson TK, Lazzenec JY, Shishido T, Yamamoto K,editors. Damage of the Bearing Surface Retrieval on Metal-on-Metal THA:  Report of 29 failure cases .  ORS Annual Meeting: 2011: Anaheim.

35. Clarke IC, Peters C, McPherson E, Donaldson TK, Smith E.  Stripe wear incidence in retrieval of 28mm MOM hip bearings.  Submitted to Annual Meeting AAHKS; Texas, 2011.

36. Personius JT, Clarke IC, Gregorius SF, Donaldson TK,  editors,  Wear of Large diameter MOM Total Hip Arthroplasty Retrievals Compared to Small Diameter MOM Bearings.  Society of Tribology and Lubrication Engineers (STLE); 2010, Las Vegas, NV. TK Donaldson:  Anterior Supine Approach to the Hip. Bristol, England December 2011.

37. TK Donaldson:  Long Term Follow Up of MOM M2A Series.  Bristol, England December, 2011.

38. TK Donaldson: Cup Position and Ion Levels in Well Functioning MOM THA. 13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA September 7-9, 2011.

39. TK Donaldson: Antero-Lateral Approach for Hip Resurfacing: A Video Vignette. 13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA September 7-9, 2011.

40. TK Donaldson: 8- Year Metal -on- Metal : Loma Linda University Experience Update. 13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA September 7-9, 2011.

41. TK Donaldson:  The Anterior Hip: The Pearls I have Learned After 4 Years. 13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA September 7-9, 2011.

42. TK Donaldson: Modern Total Knee Arthroplasty, Continuum of Constraint. 13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA September 7-9, 2011.

43. TK Donaldson: Fluoroscopic Evaluation of Total Knees: A Guide for a Revision Arthroplasty. 13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA September 7-9, 2011.

44. TK Donaldson: Early Report on a New Revision System. 13th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces. Mammoth Lakes, CA September 7-9, 2011.

45. Clarke IC, Williams PA, Donaldson TK, editors.  Wear of high carbon versus low carbon CoCr hip bearings.  Society of Tribology and Lubrication Engineers (STLE); 2010 Las Vegas, NV.

46. Kubo K, Clarke IC, Lazennec JY,  Donaldson TK,  editors. Wear Mapping Analysis with Retrieval of 28 mm CoCr-CoCr Hip Bearings -  11 years experience.  Society of Tribology and Lubrication Engineers (STLE); 2010,Las Vegas, NV.

47. Clarke IC, Donaldson TK, Peters C, McPherson E, Smith E.  Relevance  of stripe wear formations in Adverse MOM Cases.  Submitted to Summer meeting of American Hip Society: Albany, New York;. Sept. Meeting 2010.

48. Clarke IC, Donaldson TK, Hahn J, Kubo K.  Small ball versus Large ball Paradigm – Metasul- 28mm versus LBD. Summer meeting of American Hip Society, Hospital for Special Surgery, NY, 2010.

49. Clarke IC, Kubo K, Lazennec JY, Donaldson TK.  Wear Mapping analysis with 28mm MOM hip bearings over the decade. Society of Tribology and Lubrication Engineers (STLE); Las Vegas, NV, 2010.

50. TK Donaldson: Report on a Surgeons Learning Curve on the Anterior Approach for Total Hip. 11th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Indian Wells, CA October 7-9, 2009

51. TK Donaldson: Concerns Regarding: MOM Hip Results  11th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Indian Wells, CA October 7-9, 2009

52. TK Donaldson: MRI Based Computer Assisted Surgery: Early Experience. 11th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Indian Wells, CA October 7-9, 2009

53. TK Donaldson: Restoring the Joint line in Revision Total Knee: Use of 3rd Generation Design  11th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Indian Wells, CA October 7-9, 2009

54. TK Donaldson: Quadriceps Contracture: A Cause for Patellar Tendon Rupture 11th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Indian Wells, CA October 7-9, 2009

55. TK Donaldson: Antibiotic Spacer – A Report on my First Ten Cases 11th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Indian Wells, CA October 7-9, 2009

56. TK Donaldson: Hip Resurfacing Anterolateral Approach Tricks. 10th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Rancho Mirage, CA September 17-19, 2008

57. K Donaldson: Hip Arthroscopy: Curing the Snapping Hip, 10th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Rancho Mirage, CA September 17-19, 2008

58. TK Donaldson: MRI Guided Knee Sizing: Gender Differences,  10th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Rancho Mirage, CA September 17-19, 2008

59. TK Donaldson: LLU Retrieval Analysis Snapping Hip :Loose Cup 10th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Rancho Mirage, CA September 17-19, 2008

60. TK Donaldson: Hip Resurfacing Antero Lateral Approach, Low Wear Mobile Bearing Designs, Dynamic Total Knee Arthroplasty: Make Revisions Easy. 9th Annual Update in Hip and Knee Arthroplasty and Bearing Surfaces Rancho Mirage, CA September 12-14, 2007.

61. DD Green, TK Donaldson, PA Williams, G Pezzotti and IC Clarke. Long Term Stripe Wear Rates of 3rd and 4th Generation Ceramic-on-Ceramic under Micro separation. 53rd Annual Orthopedic Research Society, San Diego, February 11-14, 2007.

62. JG Bowsher, TK Donaldson, A Wang, A Essner, IC Clarke. Low running-in wear for large diameter metal-on-metal hip bearings. 53rd Annual Orthopedic Research Society, Transactions Vol.32, San Diego, February 11-14, 2007.

63. TK Donaldson, IC Clarke, G Pezzotti, DD Green, S Brown, MD Ries, PA Williams. (SE13) Status of Zirconia Hip and Knee Implants in USA. 74nd Annual American Academy of Orthopedic Surgeons Meeting, San Diego, February 14-18, 2007.

64. IC Clarke, TK Donaldson, G Pezzotti, PA Williams. (SE12) Status of Aluminum, Oxinium, Zirconia and Zirconia-toughened Alumina Hip Implants in USA. 74nd Annual American Academy of Orthopedic Surgeons Meeting, San Diego, February 14-18, 2007.

65. JG Bowsher, TK Donaldson and IC Clarke. (SE10) Using more severe test methods for improved performance predictions of joint replacements. 74nd Annual American Academy of Orthopedic Surgeons Meeting, San Diego, February 14-18, 2007.

66. JG Bowsher, TK Donaldson, A Wang, A Essner, IC Clarke. The relationship between wear and ion release for large diameter metal-on-metal hip bearings. Society for Biomaterials 2006 Annual Meeting, April 26-29, 2006, Pittsburgh, Pennsylvania.

67. JG Bowsher, TK Donaldson, PA Williams, IC Clarke. Surface damage following multiple dislocations of a 38 mm diameter metal-on-metal hip prosthesis – A case report. Journal of Arthroplasty, 2006.

68. TK Donaldson, JG Bowsher, PA Williams, DD Green, IC Clarke. Retrieval Analysis of dislocating 38mm metal-on-metal hip replacement. Society for Biomaterials 2006 Annual Meeting, April 26-29, 2006, Pittsburgh, Pennsylvania.

69. JG Bowsher, PA Williams, DD Green, IC Clarke, TK Donaldson. Performance of Mechanically Enhanced Crosslinked Polyethylene Under Standard and Severe Wear Simulator Modes. Society for Biomaterials 2006 Annual Meeting, April 26-29, 2006, Pittsburgh, Pennsylvania.

70. JG Bowsher, TK Donaldson, R Lakshminarayanan, AC Khandkar, IC Clarke. A long-term wear study of 28mm UHMWPE liners against silicon nitride versus cobalt chrome femoral heads. Society for Biomaterials 2006 Annual Meeting, April 26-29, 2006, Pittsburgh, Pennsylvania.

71. JG Bowsher, TK Donaldson, PA Williams, IC Clarke. Surface damage following multiple dislocations of a large diameter metal-on-metal hip prosthesis – A case report. JBJS, 2006.

72. JG Bowsher, PA Williams, IC Clarke, DD Green, TK Donaldson. ‘Severe’ wear challenge to 36 mm mechanically enhanced crosslinked polyethylene hip liners. JBMR, 2006.

73. G Bowsher, TK Donaldson, DD Green, R Lakshminarayanan, AC Khandkar, IC Clarke. A hip simulator study of 28mm UHMWPE liners against silicon nitride versus cobalt chrome femoral heads. JBMR, 2006.

74. HA Richardson, IC Clarke, P Williams, TK Donaldson and H Oonishi. Precision and Accuracy in Ceramic-on-Ceramic Wear Analyses: Influence of Simulator Test Duration. Proc IMechE. Vol 219 Part H: J. Engineering in Medicine, July 2005

75. T Ishida, H Shirasu, K Yamamoto, IC Clarke, DD Green, TK Donaldson, JY Lazennec. Detailed Wear Maps and               Retrieved Metal-on-Metal (MetasulTM)THR after 2 to 9 years Use. Society for Biomaterials 2006 Annual Meeting, April 26-29, 2006, Pittsburgh, Pennsylvania

76. JG Bowsher, TK Donaldson and IC Clarke. Using More Severe Test Methods for Improved Performance Predictions of Joint Replacements. 73rd Annual American Academy of Orthopedic Surgeons Meeting 2007, Chicago, Illinois, March 22-26, 2006.

77. JG Bowsher, TK Donaldson, DD Green, R Lakshminarayanan, AC Khandkar, DM Mondo, IC Clarke. Wear of UHMWPE against silicon nitride versus cobalt chrome femoral heads – a head-to-head hip simulator study, 52nd Annual Orthopaedic Research Society, March 19-22, 2006, Chicago, Illinois.

78. PA Williams, JG Bowsher, TK Donaldson, IC Clarke. Wear Particle Morphology of Sequential Irradiated/Annealed Polyethylene under a ‘Severe’ Wear Hip Simulation. 52nd Annual Orthopaedic Research Society, March 19-22, 2006, Chicago, Illinois.

79. DD Green, TK Donaldson, PA Williams, G Pezzotti, IC Clarke. Ceramic-on-Ceramic under Micro Separation Test Configuration for THR – a Study of Like-on-like and Hybrid Combinations. 18th Annual Symp ISTA, September 29- October 2, 2005, Kyoto, Japan.

80. TK Donaldson, A. Oh, K. Nasseri, H. Richardson, P. A. Williams, L. Andrusak, I. B. Kjellin, I. C. Clarke. Related Issues in Total Knee Replacement: Gender Differences and Pre-sizing Utilizing Magnetic Resonance Imaging.  18th Annual Symp ISTA, September 29- October 2, 2005, Kyoto, Japan.

81. JG Bowsher, TK Donaldson, DD Green, IC Clarke. ‘Severe’ Wear Challenge to 36mm Crosslinked Polyethylene High Cups. 18th Annual Symp ISTA, September 29- October 2, 2005, Kyoto, Japan.

82. JG Pezzotti, IC Clarke, TK Donaldson, CM Jobe. Raman Microprobe Spectroscopy of Ceramic and Polymeric Bearing Surface in Artificial Joints. 18th Annual Symp ISTA, September 29- October 2, 2005, Kyoto, Japan.

83. TK Donaldson, T Dickson, R Vinglass, H Shirasu, JG Bowsher, PA Williams, IC Clarke. SE03, Metal-metal Bearings and Large Femoral Heads for Ultra-low Wear with High Stability. 72nd Annual American Academy of Orthopedic Surgeons Meeting, February 23-27, 2005, Washington, DC.

84. HA Richardson, IC Clarke, PA Williams, H Oonishi and TK Donaldson. Validating Precision and Accuracy in Ceramic-on-Ceramic Wear Analyses: Influence of Study Duration. 51st Annual Meeting Orthopedic Research Society, February 20-23, 2005, Washington, DC.

85. DD Green, PA Williams, TK Donaldson and IC Clarke. Biolox-forte Vs. Biolox-delta Under Micro Separation Test Mode in the USA. 51st Annual Meeting Orthopedic Research Society, February 20-23, 2005, Washington, DC.

86. KA Nasseri, L Andrusak, M Sutton, PA Williams, TK Donaldson and IC Clarke. Very High Wear Rates for Hylamer Cups Apparent in ‘Senior’ Citizens’. 51st Annual Meeting Orthopedic Research Society, February 20-23, 2005, Washington, DC.